When you are having a contractor build your home, there are a few things that you need to do before they begin the project.
The first thing on the list is to find a contractor that you think that you can trust. Finding one through the phone book is not an entirely bad idea, but asking around can be more beneficial. You can use the phone book to do this or ask friends for the name of a good contractor, you will still want to get at least three different contractors on a list of those that you are considering. Make sure they all three get the same set of building plans so they are all bidding on the same project.
When looking at the bids that you have received, be wary of a bid that is significantly lower than the others. This may be a sign of inexperience or desperation. While desperation is not necessarily a bad thing, inexperience is your enemy and you need to avoid hiring an inexperienced contractor. Consider the lowest offer, but do a good amount of research on the contractor first. Get more references from him than for the higher offers to ensure that he is experienced and will do a good job.
No matter which contractor that you choose from your list, you need to visit the job site as often as possible to ensure that your new home is being built correctly and is completely up to your local building codes. Building codes vary from state to state and even city to city, so be aware that a building inspector may come by to make sure it is done correctly. You should also pay good attention to how your contractor is taking care of your building materials. Nothing should ever be stored on the ground, especially wood and drywall. These will mold fairly quickly and the last thing you want is mold built into your brand new home. For best results, have a mold inspector come out to look at the property a few times before the project is completed.
Having an experienced plumber on the job is also very necessary. Bad plumbing in your home can cause water damage that is often very expensive to repair and you never know when a leak will spring up. If a building inspector has not come out to check the property, make sure he or she does to inspect this.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.floodingct.info
http://www.floodedbasementnj.info
Tuesday, October 2, 2007
Mold Threatens Home Canned Food
If you have a fair sized garden, odds are pretty good that you know how to can a lot of the things that come out of it. This can include tomatoes, cucumbers, and just about anything you can think of. When you can your food at home out of your own garden, you know exactly what is going into it without having to look on the back of the package. Unfortunately, though, some of the people who can their own vegetables at home are making some mistakes that completely void the benefits of doing this themselves.
Mold likes to grow on anything that is organic and of course, this includes anything that you are canning in your own kitchen. But, canning your own food is completely safe and you will not run into any mold contamination issues after the jars are sealed, right..? Wrong!
Before beginning the canning process, you need to make sure that you are using only the best samples from your garden. If there are any fruits or vegetables that you are unsure about, do not use them. One bad vegetable or fruit will cause the whole batch to be bad.
Sterilize everything. This includes the jars and everything the food is going to come into contact with. You can sterilize the jars by filling them and the pot they are in with hot water and heating it to boiling. Bring the temperature of the water up gradually and do not insert a jar into water that is already boiling. They should stand upright with water inside them.
You should also not pack things too tightly inside the jars. This can keep the food in the middle from reaching a sterilizing temperature and can leave microorganisms such as bacteria and mold spores alive. After you pack the jars full of whatever you want to can, you need to begin the processing immediately. Do not use old jars and lids for this, because they may not seal entirely.
Any jars that are found to have mold growing in them need to be thrown out. This food is no longer safe to eat, even if you take what appears to be the only molded part out.
After the processing bit is over with, you should store these in an area away from heat and sunlight. They should be let to cool naturally.
Jim Corkern is a writer and promoter of quality
flood water damage restoration New Jersey and and other states such as
Connecticut Water Damage Restoration companies across the united states.
Mold likes to grow on anything that is organic and of course, this includes anything that you are canning in your own kitchen. But, canning your own food is completely safe and you will not run into any mold contamination issues after the jars are sealed, right..? Wrong!
Before beginning the canning process, you need to make sure that you are using only the best samples from your garden. If there are any fruits or vegetables that you are unsure about, do not use them. One bad vegetable or fruit will cause the whole batch to be bad.
Sterilize everything. This includes the jars and everything the food is going to come into contact with. You can sterilize the jars by filling them and the pot they are in with hot water and heating it to boiling. Bring the temperature of the water up gradually and do not insert a jar into water that is already boiling. They should stand upright with water inside them.
You should also not pack things too tightly inside the jars. This can keep the food in the middle from reaching a sterilizing temperature and can leave microorganisms such as bacteria and mold spores alive. After you pack the jars full of whatever you want to can, you need to begin the processing immediately. Do not use old jars and lids for this, because they may not seal entirely.
Any jars that are found to have mold growing in them need to be thrown out. This food is no longer safe to eat, even if you take what appears to be the only molded part out.
After the processing bit is over with, you should store these in an area away from heat and sunlight. They should be let to cool naturally.
Jim Corkern is a writer and promoter of quality
flood water damage restoration New Jersey and and other states such as
Connecticut Water Damage Restoration companies across the united states.
Mold and Plumbing Considerations When Hiring a Contractor
When building a new home or remodeling your old one, the most important decision that you need to make is who will do the job. The contractor that you hire to do this project is obviously going to influence how it turns out, not the budget or what type of materials you plan on using. You could do some of the remodeling work on your own and get away with it if you do your research ahead of time, but if you are planning on building a house and have no prior experience, then the best thing to do is to leave it to the professionals.
Finding a contractor in the phone book might not seem like a great idea, but for those of us moving to new areas and wanting to build a new home there, we may not have the advantage of talking to friends and neighbors in the area and getting references. No matter which method you use, you will want to get at least three different bids using the same exact building plans. Ask for references and do not be afraid to check up on them. Ask any of the references if they have had problems with mold or water damage in their constructions since they were first built. This should give you a decent idea whether the contractor can do the job you want.
You should visit the job site often and pay attention to how the contractor and his people are treating the building materials that you had them purchase for the job. None of these things should be stored directly on the ground, especially drywall and lumber, since these are porous surfaces. Mold will start to grow on these items and it will become built into the foundation of your home from the very start and even though your contractor will be liable should you have a problem later, it will be a huge inconvenience to deal with. It is better to monitor the care of your home’s building materials from the beginning. Have a mold inspector come at different intervals during the construction.
Make sure that your contractor has a plumber that knows what he or she is doing on the job to install the plumbing system. You want to make sure that the plumbing system is installed on your property correctly and that it is up to code. If you are having new plumbing installed in your home as a part of a remodeling or renovation project, you will want to have it inspected to be sure that it is up to code, especially if you live in an area with strict building codes.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.floodchicago.info
http://www.damagewatersc.info
Finding a contractor in the phone book might not seem like a great idea, but for those of us moving to new areas and wanting to build a new home there, we may not have the advantage of talking to friends and neighbors in the area and getting references. No matter which method you use, you will want to get at least three different bids using the same exact building plans. Ask for references and do not be afraid to check up on them. Ask any of the references if they have had problems with mold or water damage in their constructions since they were first built. This should give you a decent idea whether the contractor can do the job you want.
You should visit the job site often and pay attention to how the contractor and his people are treating the building materials that you had them purchase for the job. None of these things should be stored directly on the ground, especially drywall and lumber, since these are porous surfaces. Mold will start to grow on these items and it will become built into the foundation of your home from the very start and even though your contractor will be liable should you have a problem later, it will be a huge inconvenience to deal with. It is better to monitor the care of your home’s building materials from the beginning. Have a mold inspector come at different intervals during the construction.
Make sure that your contractor has a plumber that knows what he or she is doing on the job to install the plumbing system. You want to make sure that the plumbing system is installed on your property correctly and that it is up to code. If you are having new plumbing installed in your home as a part of a remodeling or renovation project, you will want to have it inspected to be sure that it is up to code, especially if you live in an area with strict building codes.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.floodchicago.info
http://www.damagewatersc.info
Subscribe to:
Posts (Atom)
